Metal Gearbox AX2 2Speeds Gearbox Transmission Box for 1/10 RC Crawler Car Axial SCX10 Wraith Upgrade Parts
RCBENECO Metal Gearbox AX2 2Speeds Gearbox Transmission Box for 1/10 RC Crawler Car Axial SCX10 Wraith Upgrade Parts
Package List:
1Set * Axial SCX10 Gearbox
Feature:
This is the ULTIMATE upgrade for your Wraith AX10 or SCX10. Adding this will give your truck a TWO speed transmision at the flick of a transmitter switch!
You will NEVER feel if only I had more torque or more speed - now you can have both.
Easliy mounts to existing transmission plates with NO modification - all you need to do is add a servo to 'change gear'.
The build quality of this is just first classis both inside and out. The extra weight of the Billet Alumnium body adds that all important weight down low.
Fitted with metal internal gears and bearings.
CNC Machined Billet Aluminum.
Slipper Clutch.
Shift Servo mount.
Compatible With Other Brand Pinions and Spur Gears.
Wraith / SCX10 direct fit.
Specifications:
2 Speeds
60T 32P Delrin Spur
Gear ratio Pinion / Spur ratio = 4:1
Wide Steel 48 pitch internal gears
1st Gear Ratio = 5.05:1
2nd Gear Ratio = 1.78:1
Output Shaft OD: 5mm
Width: 121.7mm
Weight: 247g
Note:
For best results you will need to remove the shifters from the Wraith interior.
Put the servo on and attach the shift linkage.
Install in Wraith. and refit the interior.
Without pinion/spur, stock Axial tranny is 2.6:1.
For installation into the SCX10 line, you will need to customize your setup.
Package List:
1Set * Axial SCX10 Gearbox
Feature:
This is the ULTIMATE upgrade for your Wraith AX10 or SCX10. Adding this will give your truck a TWO speed transmision at the flick of a transmitter switch!
You will NEVER feel if only I had more torque or more speed - now you can have both.
Easliy mounts to existing transmission plates with NO modification - all you need to do is add a servo to 'change gear'.
The build quality of this is just first classis both inside and out. The extra weight of the Billet Alumnium body adds that all important weight down low.
Fitted with metal internal gears and bearings.
CNC Machined Billet Aluminum.
Slipper Clutch.
Shift Servo mount.
Compatible With Other Brand Pinions and Spur Gears.
Wraith / SCX10 direct fit.
Specifications:
2 Speeds
60T 32P Delrin Spur
Gear ratio Pinion / Spur ratio = 4:1
Wide Steel 48 pitch internal gears
1st Gear Ratio = 5.05:1
2nd Gear Ratio = 1.78:1
Output Shaft OD: 5mm
Width: 121.7mm
Weight: 247g
Note:
For best results you will need to remove the shifters from the Wraith interior.
Put the servo on and attach the shift linkage.
Install in Wraith. and refit the interior.
Without pinion/spur, stock Axial tranny is 2.6:1.
For installation into the SCX10 line, you will need to customize your setup.